ANYCUBIC Wash&Cure 3/Wash&Cure 3 Plus/Max For 3D Printer Washing Model and Curing Model 2-in-1 For Photon Mono 2/Photon M3 MAX

Anycubic Wash & Cure 3 Basket cleaning mode: 165*100*180mm Hanging cleaning mode: 160*100*165mm Curing Size：160*180mm Refresh Your Post-process Experience Extra Large | Gooseneck Lights | IPA-saving Larger Size for Upgraded Capacity Compared to Anycubic Wash & Cure 2.0, the Anycubic Wash& Cure 3 has an impressive 100% increase in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less. The curing size has increased by 15%, up to 160*180 millimeters, to accommodate larger and more models for single post-processing session. Localized Strengthening, Uniform Curing The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments. *Data sourced from Anycubic Laboratory By adopting a brand-new arrangement of light beads and lens light source, Anycubic Wash & Cure 3.0's curing uniformity has been enhanced by 20%* compared to its predecessor 2.0. This results in a more thorough and comprehensive curing of the entire model. Dual-layer Design, IPA Saving The double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage. Cleaning basket made of PP material (rust-resistant) VS the previous generation's metal material (prone to rust) Simple Operation, Quiet and Efficient Cleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will. Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced, creating a quieter and more comfortable working environment. Machine Model Comparison Anycubic Wash & Cure Max >>> Specifications AUTO mode process 1. Spray forest cleaning for 4mins 2. Soak and clean the bottom for 3mins 3. Curing for 3mins Machine size：434*434*556mm/17.1*17.1*21.9 inches (LWH) Washing size：300*165*300mm Weight: ~18.3kg One for All 14.9 L | Spray Cleaning | Alcohol-Efficient Larger Size,Higher Compatibility The unit can hold up to 14.9 liters (15.7 qts.), surpassing the sizes of most wash & cure machines in the market. The impressive maximum cleaning size of 300*165*300mm (11.8”x 6.5” x 11.8”) , is compatible with almost every consumer-grade resin 3D printer measuring 13.6”(35 cm) and below available on the market. Powerful and Alcohol-Efficient The adoption of two brand-new modes of spray rinsing and detail dipping ensures efficient and thorough cleaning. Powerful mechanical injection eliminates residual resin on the print surface, while the bottom dipping rinse effectively removes resin from intricate details. 4 liters (4.2 qts.) of isopropyl alcohol is enough to clean large-sized models (10” (25cm) and up), saving over 50% compared to 8.5 liters (9 qts.) required by traditional machines. Moreover, one 5-liter (5.3 qts.) bucket of isopropyl alcohol can clean up to 20 models (10” (25cm) in height and up), minimizing alcohol loss during a single wash Supports cleaning of models with build plate that the size is up to 12 inches (weight not exceeding 2.2 kg) One-click Washing and Curing Complete Washing and Curing with a Dual-Function Button. Bid farewell to time-consuming and labor-intensive post-processing. Experience streamlined model processing that saves you time and effort. Comprehensive Protection with Fault Detection Intelligent fault detection and alerting to inform users when doors are not properly closed, when water has entered the unit or outlets have become blocked during operation. Promptly identifies and resolves faults to ensure seamless washing and curing operations. ANYCUBIC Photon Mono 2 LCD UV Resin 3D Printer High-Speed 3D Printing 6.6" 4K+ Monochrome Screen 165*143*89mm Printing Size USD 137.23-494.10/piece ANYCUBIC Photon Mono M7 Pro UV Resin 3D Printer 10'' 14K LCD 3D Printer With Automatic Resin Refill High Speed Printing Size 223 USD 452.90-730.00/piece ANYCUBIC Photon Mono X 6Ks LCD 3D Printer 9.1'' 6K Large Screen 3D Printing 4.76L Build Volume UV Resin SLA 3D Printers USD 191.62-722.60/piece ANYCUBIC Wash & Cure 3 For Mars Photon Mono 2 LCD SLA DLP 3D Printer Models UV Rotary Curing Resin Cleaning Machine 2 in 1 USD 90.11-160.99/piece